W211/R230 ABS/SBC Tool Repair Code C249F SBC Reset Tool Fit For Mercedes Benz

Description

Products, please follow the steps below:
1 An OBD BENZ SBC TOOL 16PIN connector is inserted into the OBD-11 communication port of the vehicle;
2 Turn the ignition switch to ON, the OBD BENZ SBC TOOL power light will be on, the device will beep, and the second sound will indicate that the device is working normally;
3 Then you need to restore the maintenance mode switch (25%-50%-75%-100% can be selected). At this time, the frequency BUSY indicator will light up, and the device will beep, and the data will be restored in 10 seconds, and the BUSY indicator will always be on.
The W211/R230 ABS/SBC tool (service code C249F) for Mercedes-Benz cars has W211 and R230 with ABS SBC system.
W211/R230 ABS/SBC Mercedes-Benz Tools
The instructions are as follows:
Tip: Code C249F, component A7/3 running time exceeded (SBC hydraulic device)
The above prompt is the internal failure of the control unit, the SBC control module needs to be replaced, and it can be easily repaired by using W211/R230 TOOL, without the need to replace a new control module.
For Mercedes-Benz’s safety precautions, before attempting to repair the brake systems of its W211 (E-class) and R230 (SL-class) models, the Sensotronic brake control (SBC) must be deactivated using its STAR-DIAGNOSIS tester. ) system.
Before performing any maintenance work on the brakes (such as changing brake pads, brake discs and brake fluid), it is absolutely necessary to deactivate the SBC system because the pressure of the system is 140 bar. The mechanics who perform braking services on these models must have the right tools to avoid the risk of personal injury and damage to the braking system.
Before launching this cheap, convenient, light, safe and easy-to-use SBC tool, it was another alternative to the STAR-DIAGNOSIS tester when working on the SBC system. It can perform tasks equally well, efficiently and safely.
After the repair is complete, you can activate the SBC system and restore its pressure. The memory is automatically cleared.
-Quick and easy operation via LED indication.
-Safe to use
-Turn on the power when plugged into the vehicle? OBDII diagnostic connector.
-Lightweight, compact and very convenient.
-Independent unit.
This SBC tool is suitable for W211 (E level) and R230 (SL level) with SBC system.
It is very suitable for:
-Brake center
-Independent of the Mercedes-Benz workshop
-Tire Service Center
-Service garage
-Quick Service Center
-Applicable to Mercedes-Benz Specialty Center
-Car repair workshop
SBC tool support type:
Bosch NR: 0 265 960 012
Bosch NR: 0 265 960 013
Bosch NR:0 265 960 015
Bosch NR: 0 265 960 018
Bosch NR: 0 265 960 019
Bosch NR: 0 265 960 020
Bosch NR:0 265 960 023
Bosch NR: 0 265 960 025
Bosch NR: 0 265 960 028
Package Included:
1 piece x W211/R230 ABS/SBC tool
1 piece x OBD2 cable
1pc x CD software