Thinktool mini OBD2 Scanner All System Car Diagnostic Tool Code Reader IMMO TPMS

Description

🚗Full System Diagnostic for 94 car makes, 🚗Optional bidirectional test and ECU Coding, 🚗Wireless Connector, 🚗28 Service Reset Functions, 🚗Lifetime free udpate,
Store category
Sign Up Now !
You may also like
THINKTOOL MINI OBD2 Scanner Car Diagnostic Tool Code Reader All System IMMO TPMS
Product Description
Why Choose THINKTOOL MINI?
1.
Support Full System Diagnosis
(Read Codes,Clear Codes,Data Stream Display)
2.
Support 28 Reset Service
,more than Launch CRP909X/Autel MK808 etc.
3.
Automatically scan VIN to identify vehicle information.
4.
The Bluetooth connector is connected to the vehicle for easy use.
N
o need the cables contact with
c
ar ,
m
ore Convenience
5.
Full OBD2 Functions
6.
Actuation Test and ECU Coding(Need additional payment to purchase and use)
7.
Support more than 94 Car Brands.
8.
Support Multi-language:
English, German, Spanish, French, Italian, Japanese, Polish,Portuguese
Thinktool mini Supported 28 Kinds of Reset Service
:
1.Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset them ileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.
2.Elec.Throttle Adaption
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.
3.Steering Angle Reset
To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
4.Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
5.ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
6.Break-pad Reset
lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.
7.DPF Regeneration
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
8.Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer to more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped with Delphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.
9.IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. When the ignition switch key, ignition switch, combined instrument panel,ECu,BCM, or remote control battery is replaced, anti-theft key matching must be performed.
10.Injector Coding
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
11.TPMS Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,and tire is replaced for the car with tire pressure monitoring function.
12.Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.
13.AFS Reset
This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.
14.A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
15.Sunroof Initialization
This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.
16.EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
17.ODO Reset
a) ODo reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car
diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.
18.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of the airbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the airbag computer can continue to use.
19.Transport Mode
ln order to reduce power consumption, the following functions may be disabled,including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
20.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
21.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
22.NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
23.AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
24.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
25.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
26.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
27.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
28.Language Change
This function is used to change the system language of the vehicle central control panel.
ALL SYSTEMS Diagnosis on Your Vehicles
THINKTOOL MINI automotive scanner Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.
Engines
Auto Transmission
Airbags
Immobilizer
ABS ESP system
Cruise Control system
Gateway
Body Systems
Steering system
TPMS system
Rain Sensors
4WD System Stabilizer
Intelligent Parking Assist
Audio Radio Systems
Air Conditioning
Central Locking
Electric Windows
Heated Rear Window
Xenon Headlights
Wash Wipe
Fuel Burning Heater
Seat & Door Motor system
Electronic Throttle system
Electronic Spark System
......
Additional extended functions
(need to pay extra)
ECU Coding:
THINKSCAN Max offers the ECU Coding feature,which is not available in conventional code readers, to allow you: 1. To perform the customer individual customization of the car such setting alarms, doors locking, and outdoor lighting, etc., to improve vehicle performance,or stimulate high-end car functions. 2. To alter the configuration when a component is replaced, so the new actuators can be recognized by related vehicle systems. 3. To enable multiple car systems to recognize each other, and so the actuators can start to work.
Actuation Test:
The Active Test function is used to access vehicle-specific subsystem and component tests. Available test vary by manufacturer, year, and model, and only the available tests display in the menu.
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics
1
、
Reading Codes:
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2
、
Erasing Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3
、
Data Stream:
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4
、
I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5
、
Read Live Data Stream:
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6
、
View Freeze Frame Data:
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7
、
O2 Sensor Test:
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8
、
On-Board Monitor Test:
Retrieves and displays test results for emission-related powertrain components and systems.
9
、
Read Vehicle Information:
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10
、
Component Test:
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
>>>Other Feature of
THINKTOOL MINI
1.DTC Library:
Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.
2.Diagnostic Feedback:
Use this option to submit the vehicle issue to us for analysis and the report can be saved offline.
3.Diagnose Report Share & Printed:
you can share the diagnose report to your email ,then printed via computer.
4.Car Model Function Search:
Enter a specific car model to help you find out which systems and functions the device supports for your car model.
5.
AUTOVIN SCAN:
click "diagnose" and "autosearch" after connecting to the vehicle. Then the thinktool mini automotive diagnosti tool will begin to scan the VIN automatically.
6.
One-Key Wifi Update:
no need to update on computer. Just click update after connecting wifi, then all softwares will start to update. (you will enjoy lifetime update through one-key wifi update, which is rare in diagnostic market as other diagnostic tools only offer one year free update.)
7.
One-Key Screenshot:
use the feature to capture and save the diagnostic process for you rather than take pictures by telephone.
Car Brands Supported by THINKTOOL MINI:
For ASTONMARTIN, For AUDI, For AUSTFORD, For AUSTHOLDEN, For BAIC, For BENZ, For BMW, For BXFIAT, For BXGM, For CHANGAN, For CHANGCHENG, For CHANGHE, For CHRYSLER, For CITROEN, For DAEWOO, For DAIHATSU, For DFXK, For DR, For FERRARI, For FIAT,FLYER, For FUTIAN, For GAZ, For GM, For HAFEI, For HMAZDA, For HONDA, For HUACHEN, For HYUNDAI, For IKCO, For INDIANMAHINDRA, For INDIANMARUTI, For INDIANTATA, For JMC, For IVECO, For IZH, For JACTY, For JIAO, For JINLONG, For JOYLONG, For ISUZU, For KIA, For LANDROVER, For LIFAN, For LIUWEI_TY, For LUXGEN, For MAHINDRA, For MALAYSIA PERODUA, For MALAYSIA PROTON, For MARUTI, For MASERATI, For MAXUS, For MAZDA, For MITSUBISHI, For MVM, For NISSAN, For OPEL, For PAZ, For PERODUA, For PEUGEOT, For PORSCHE, For PROTON, For QIRUI_TY, For QOROS, For RENAULT, For ROVER, For SAAB, For SAICMG, For SAIPA, For SEAT, For SEAZ, For SGM, For SKODA, For SMART, For SPARK_TY, For SPRINTER, For SSANGYONG, For SUBARU, For SUZUKI, For TATA, For TOYOTA, For TRUMPCHI, For UAZ, For USAFORD, For VAZ, For VOLVO, For VW, For XIALI, For XINKAI, For ZAZ, For ZHONGSHUN, For ZHONGTAI, For ZHONGXING
Thinktool Mini OBD 2 Scanner Parameters
Operating System: Android 7.0 RAM: 32G LCD: 5.99 inch LCD Resolution: 1920*1200 IPS Touch Screen Camera:800 megapixel Connection Method: Wi-Fi Bluetooth: Supported Working Temperature: 0 ~ ℃ 45℃ Storage Temperature: -20 ~ ℃ 70℃
Payment
Shipment
About US
Customer Services
Contact us
Payment
-We accept payment via Paypal.
-Payment must be made within 7 days. If you don't make the payment within 7 days, you may received a Non-payment message automatically sent from eBay.
Non-payment may result in an UPI (Unpaid Item), eBay will automatically close your account if you accumulate 4 UPI's total. Total amount due includes the final auction price plus S&H(Shipping and Handling).
-Your package will be out within 1 business day after payment cleared.
Shipment
1.Shipping address supplied by Paypal is acceptable.
2.
All parcels will be send via USPS/USPS priority/UPS/ Expedited Shipping
3. After the payment cleared, your order will be sent out within 1 business days (not including holiday and weekend).
4. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
5. Any further queries, please don't hesitate to email us. Thank you.
About US
-We are a professional Authorized dealers of
AUTEL, ANCEL, AUTOPHIX, FOXWELL, KZYEE, LAUNCH, NEXAS, Vgate, OBDPROG,OBDSTAR etc
.
Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
- We supply many products on Automobile consumer.
There are OBDII cars / Light Trucks / Heavy Duty Truck's Diagnostic Tool, Mileage Correction & Key Program tool, Battery Tester, Fuel Injector Cleaner, Digital Circuit Tester, lgnition Spark Tester
and much more others products.
-We are eager to be your professional partner of automobile diagnostic tool.
-We support remote assistance by TeamViewer if you have any difficulty in software installation.
Customer Services
1. Please do not hesitate to leave us your
5 Star ★★★★★ of DSR positive feedback
if you are satisfaction with our products ,delivery or services .
2. If you
have Any Questions Or unsatisfied with your purchase, please email us first to get a better solution
before you leave a neutral or negative feedback
,
we work hard to make sure every customer 100% satisfied and resolve any problem for you.
Thank you for your kindness.
Contact us
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2. Please email us first
before giving negative feedback or opening a case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and Holidays） .
Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .
Feedback