LAUNCH CNC603C Auto Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine

Description

Store category
Sign Up Now !
You may also like
LAUNCH CNC603C Auto Car Fuel Injector Cleaner Tester Ultrasonic Cleaning Machine
Product Description
Descriptions:
Launch CNC603C is an electromechanical integration product that combines ultrasonic cleaning technology with microprocessor hydraulic control cleaning detection technology.
It can simulate various working conditionsn of the engine, clean and inspect the fuel injectors of the car,and also clean the fuel injectors and the fuel supply system.
Main Functions:
Uniformity / Sprayability test: to detect the uniformity of the fuel injection quantity of each injector and monitor the spray status of injectors thoroughly and carefully by using the backlight, and to backflush injectors.
Leakage test: to test the leakage and dribbling conditions of injectors under system pressure.
Injecting flow test: to detect the amount of fuel injected normally by injectors in 15 seconds.
Auto. test: under specific working conditions and parameters, the precise simulation of test of injectors under various working conditions.
Ultrasonic cleaning: to perform ultrasonic cleaning on multiple injectors at the same time, removing carbon deposits on injectors completely.
On-Vehicle Cleaning: Coming with a variety of disassembly-free cleaning connectors, the device can be
used to perform on-vehicle cleaning and maintenance for various vehicle models.
Language selection: the system supports multiple languages and users can choose the appropriate language according to their needs.
Version information: to check the software version information of the current device.
Main Features:
Adopting ultrasonic cleaning technology, CNC-603A Injector Cleaner & Tester presents a strong cleaning ability;
This machine also adopts fuel pressure adjustment and control technology by microcomputer, which can ensure stable fuel pressure and wide adjustable range. It is applicable to vehicles equipped with a variety of gasoline injection systems. Meanwhile, the automation of injectors’ cleaning and testing processes can be realized.
Thanks to the adoption of microcomputer automatic control and digital display technologies, the cleaning
and testing processes can be controlled automatically and the parameters of the main status can be monitored in real time.
Automatic fuel drain during a certain test can be realized via a routine, owing to the adoption of automatic
fuel drain control technology.
Start or [stop] fuel drainage via the [Drain] button on the control panel in running or stop state.
1. Cleaning and Testing Sequences
It is recommended to carry out the complete cleaning and testing procedures in the following order.
Ultrasonic cleaning;
Uniformity / Sprayability test
Leakage test;
Injecting flow test
;
Auto. test.
Select the corresponding parameter according to different test items and set it. See “V. Operation Processes” for
details.
2. Cleanup after Operation
After the end of cleaning and testing, a cleanup should be done, which includes:
Press [Drain] button on the control panel to drain test solution to a fuel container.
Switch off the power switch and unplug the power plug.
Take out the ultrasonic cleaning pool and pouring out all cleaning fluid completely shown in Figure 4.2, and wipe the ultrasonic cleaning unit with a soft dry cloth.
Wipe the table top of the machine with a soft dry cloth.
To avoid volatilization, all the test solution in the fuel tank should be discharged. If it can be used again, store
it in a safe place. If it is dirty and cannot be used any more, dispose it according to relevant regulations.
3. Specifications:
Power: AC110V-127V，50Hz/60Hz 3Amax
AC220V-230V，50Hz/60Hz 1.5Amax
Mechanical Power: 300W
Ultrasonic Cleaning Power: 100W
Speed Range for Simulation Test: 10～9990rpm
(step: 10rpm)
Environment Temperature: 0℃~+45℃
Relative Humidity: ＜85%
Strength of External Magnetic Field: ＜400A/m
Open fires is strictly prohibited within 2m.
Timing Range: 1～9999s
Pulse Width Range: 0.5～25ms (step: 0.1ms)
Operating Volume: 3000ml
Main Unit Introduction:
1- Pulse line; 2-Fuel distributor assembly; 3-Observation window tube; 4-Ultrasonic cleaner;
5-Control panel; 6-Power switch; 7-Fuel pressure gauge; 8-Quick Connector ; 9-Fuel pump;
10-Fuel drainage pipe; 11-Automatic cleaning oil return port
4. Language Selection
To adapt to the needs of different countries, multiple languages are available. Users can choose the appropriate
language according to their needs.
Method and Steps:
1)  Move the cursor to the language selection icon on the main interface and press the knob to enter the
language selection interface, as shown in Figure 5.16.
2)  Turn the knob to select the corresponding language, as shown in Figure 5.17. Press the knob and the
system will automatically change the language and exit the language selection interface automatically.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We only accept PayPal payments.
Payment should be made within 5 days after bidding ends.
We are not responsible for buyers' local taxes.
（1） Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
（2）Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
Delivery details
We only ship parcel to the address in eBay payment.
（1）0Please make sure payment address in eBay is correct.
（2）Please be known that different shipping service means different shipping charge and shipping time!!!
（3）All packages will be added with a tracking number.
Terms of sales
（1）Item may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.
（2）Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
（3）Before any return, a Return Merchandise Authorization (RMA
)
must be obtained
by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.
About us
（1）We are a professional worldwide wholesale company, with own factory located in China. We supply many products on Automobile consumer . Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
（2）
We are a professional Authorized dealers of AUTOOL，Launch，Autel and Xtool .
（3）Global logistics system：US warehouse, German warehouse, China warehouse.
Contact us
（1）Our normal business hour is
Monday to Friday 9:00 AM to 6:00 PM Beijing TIME.
（2）Please email me through "
MY MESSAGES
" on eBay, if you have any questions about our listings or inventory or troubles.
（3）Welcome your any-time parchase!
Feedback