Hydroponic Grow Room Greenhouse CO2 Generator NG Natural Gas 4 Burner 12540 BTU

Description

Hydroponic Grow Room Greenhouse CO2 Generator NG Natural Gas 4 Burner 12540 BTU
a.imagelink {color:#296028;} a:hover.imagelink {color:#296028;} a:visited.imagelink {color:#7e9b34;} a.imagelink img.auctionimage { border: 2px solid #296028; } a:visited.imagelink img.auctionimage { border: 2px solid #7e9b34; }
CO2 Burner Generator for Plant 4 Burner Natural Gas Greenhouse Hydroponic Room
Summarization:
CO2 generator main uses in plant vegetables，increase CO2 content for vegetable and flower planting in greenhouse.
It is an
ideal greenhouse product for accelerating plant growth,
increasing yield, improving quality and can enhancing
disease-resistance. This 4 burner CO2 generator can
produce 3-13 cubic feet per hour. The W4B is
recommended for areas under 3200 cubic feet.
NOTE: An air exchange is recommended when using
CO2 generators. At least once every hour to avoid your
plants from getting CO2 poisoning.
The W4B used an automatic electronic ignition module.
When ignite unsuccessfully, the solenoid valve can
automatically prevent the gas from leaking out in the
event. A standard tip over switch is one of the safety
features of the W4B.
Also, comes standard with 4 brass burners and a 12 foot
hose. A regulator is provided, so that you can connect or
tap into existing lines.
Reducing Burners
The W4B CO2 generator installed four burners, you can reduce them as needed, front panel can be removed.
Four screws are used to secure the panel in place. Simply loosen the screws and lift the panel off the keyhole in
order to expose the burner assembly. Be sure to replace the cover prior to operating.
Natural Gas Generators Only
NOTE: It is very important to install the regulator “in-Line” between your gas supply and generator. The
regulator supplied with the W4B-NG is present to maintain a constant pressure of 4.5” WC. Which is around ¼
PSI. Before installation, verify your main gas pressure. Most Gas companies install low pressure gas regulators
at the meter that are about ½ PSI. Some commercial buildings have a high pressure gas main (usually around 2
PSI). If the pressure is high, it will need to be reduced to ½ PSI or lower before installing regulator (high
pressure can keep the valves open, causing unit to run with no power).
4) When installing, make sure to install a gas shut-off valve on your line (turn off at main or meter). Install the
shut-off valve in an accessible location. Install the in-line regulator to the gas supply (3/8” NPT female thread).
Connect the hose to the flared fitting on regulator. Using two crescent wrenches or similar to tighten
connections.
5) Open the inline shut off valve (make sure the main is on). Check for leaks using soapy water and a spray
bottle. Look for bubbling, this indicates a leak.
6 ) Flip power switch to on position, within 20 sec. unit will begin to spark to ignite the fuel
Connecting to CO2 controller
NOTE: The recommended CO2 level for optimum growth is between 1000 to 1500 PPM. Above these levels
is considered wasteful. Above 5000 PPM is considered dangerous to animals and humans. Side effects of
excessive CO2 include headache, drowsiness & shortness of breath. Use a PPM controller to ensure you’re
maintaining proper PPM levels.
1) Connect the CO2 generator’s power supply to the controller that you are using. Usage of the generator
should be during lights ON hours. At bare minimum, a timer can be used to turn the generator on/off.
Possibilities are likely to exceed recommended PPM range with this method.
2) Set CO2 controller to desired PPM level and plug in the power of the CO2 generator into the controller.
Natural Gas Pressure: 4.5'' WC
Total BTU 1 burner: Natural Gas 3,135
Total BTU 2 burner: Natural Gas 6,270
Total BTU 3 burner: Natural Gas 9,405
Total BTU 4 burner: Natural Gas 12,540
Dimensions: 11”x16 ½” x 8 1/2''
WARNING:
Not recommended for use inside of a Grow tent. The high heat can cause melting of the wall material.
THis is only for Natural Gas, this will not work with  LP Propane Gas.
We only accept the payment by Paypal.
Buyers are required to carefully follow payment instructions on the checkout page, and note down any necessary details on it (e.g. bank account details).
If buyers fail to follow the instructions on the checkout page, We are not liable for any unidentified payments and subsequent delivery delays.
Our warehouse is located in
US
. All orders will be shipped from our US warehouse.
Items are generally dispatched within 1 working day after payment is cleared.
Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavour to send all our items with tracking numbers. If there are anything wrong with the tracking number, please contact seller at any time.
Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
Re-delivery fee may be charged to buyers for items that are undeliverable and/or returned to us due to incorrect delivery address or unsuccessful deliveries.
Items will only be delivered during normal working hours (9am to 5pm on weekdays. Delivery is not available on weekends, public holidays or after business hours.
Returns must be agreed by both parties prior to the actual return with 30 business days.
Buyers must also strictly follow our returns procedure when returning an item.
We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received.
Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item.
Return postage should be covered by buyer in this case.
If it is buyer's personal reason to return the item, such as does fit, the return postage would be at buyer's charge.
We maintain high standards of excellence service and strive for 100% customer satisfaction! Feedback is very important to us.
You are guaranteed to have your order fully delivered or your money back. Kindly contact us freely if there is any issue with our products.
Certain images/photos incorporated into this template are the property of JuperiterImages, used with permission under license.
CO2 Burner Generator for Plant 4 Burner Natural Gas Greenhouse Hydroponic Room
Summarization:
CO2 generator main uses in plant vegetables，increase CO2 content for vegetable and flower planting in greenhouse.
It is an
ideal greenhouse product for accelerating plant growth,
increasing yield, improving quality and can enhancing
disease-resistance. This 4 burner CO2 generator can
produce 3-13 cubic feet per hour. The W4B is
recommended for areas under 3200 cubic feet.
NOTE: An air exchange is recommended when using
CO2 generators. At least once every hour to avoid your
plants from getting CO2 poisoning.
The W4B used an automatic electronic ignition module.
When ignite unsuccessfully, the solenoid valve can
automatically prevent the gas from leaking out in the
event. A standard tip over switch is one of the safety
features of the W4B.
Also, comes standard with 4 brass burners and a 12 foot
hose. A regulator is provided, so that you can connect or
tap into existing lines.
Reducing Burners
The W4B CO2 generator installed four burners, you can reduce them as needed, front panel can be removed.
Four screws are used to secure the panel in place. Simply loosen the screws and lift the panel off the keyhole in
order to expose the burner assembly. Be sure to replace the cover prior to operating.
Natural Gas Generators Only
NOTE: It is very important to install the regulator “in-Line” between your gas supply and generator. The
regulator supplied with the W4B-NG is present to maintain a constant pressure of 4.5” WC. Which is around ¼
PSI. Before installation, verify your main gas pressure. Most Gas companies install low pressure gas regulators
at the meter that are about ½ PSI. Some commercial buildings have a high pressure gas main (usually around 2
PSI). If the pressure is high, it will need to be reduced to ½ PSI or lower before installing regulator (high
pressure can keep the valves open, causing unit to run with no power).
4) When installing, make sure to install a gas shut-off valve on your line (turn off at main or meter). Install the
shut-off valve in an accessible location. Install the in-line regulator to the gas supply (3/8” NPT female thread).
Connect the hose to the flared fitting on regulator. Using two crescent wrenches or similar to tighten
connections.
5) Open the inline shut off valve (make sure the main is on). Check for leaks using soapy water and a spray
bottle. Look for bubbling, this indicates a leak.
6 ) Flip power switch to on position, within 20 sec. unit will begin to spark to ignite the fuel
Connecting to CO2 controller
NOTE: The recommended CO2 level for optimum growth is between 1000 to 1500 PPM. Above these levels
is considered wasteful. Above 5000 PPM is considered dangerous to animals and humans. Side effects of
excessive CO2 include headache, drowsiness & shortness of breath. Use a PPM controller to ensure you’re
maintaining proper PPM levels.
1) Connect the CO2 generator’s power supply to the controller that you are using. Usage of the generator
should be during lights ON hours. At bare minimum, a timer can be used to turn the generator on/off.
Possibilities are likely to exceed recommended PPM range with this method.
2) Set CO2 controller to desired PPM level and plug in the power of the CO2 generator into the controller.
Natural Gas Pressure: 4.5'' WC
Total BTU 1 burner: Natural Gas 3,135
Total BTU 2 burner: Natural Gas 6,270
Total BTU 3 burner: Natural Gas 9,405
Total BTU 4 burner: Natural Gas 12,540
Dimensions: 11”x16 ½” x 8 1/2''
WARNING:
Not recommended for use inside of a Grow tent. The high heat can cause melting of the wall material.
THis is only for Natural Gas, this will not work with  LP Propane Gas.
PAYMENT
We only accept the payment by Paypal.
Buyers are required to carefully follow payment instructions on the checkout page, and note down any necessary details on it (e.g. bank account details).
If buyers fail to follow the instructions on the checkout page, We are not liable for any unidentified payments and subsequent delivery delays.
SHIPPING
Our warehouse is located in
US
. All orders will be shipped from our US warehouse.
Items are generally dispatched within 1 working day after payment is cleared.
Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavour to send all our items with tracking numbers. If there are anything wrong with the tracking number, please contact seller at any time.
Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
Re-delivery fee may be charged to buyers for items that are undeliverable and/or returned to us due to incorrect delivery address or unsuccessful deliveries.
Items will only be delivered during normal working hours (9am to 5pm on weekdays. Delivery is not available on weekends, public holidays or after business hours.
Terms of Sale
Returns must be agreed by both parties prior to the actual return with 30 business days.
Buyers must also strictly follow our returns procedure when returning an item.
We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received.
Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item.
Return postage should be covered by buyer in this case.
If it is buyer's personal reason to return the item, such as does fit, the return postage would be at buyer's charge.
ABOUT US
We maintain high standards of excellence service and strive for 100% customer satisfaction! Feedback is very important to us.
You are guaranteed to have your order fully delivered or your money back. Kindly contact us freely if there is any issue with our products.