-40%
Automotive EVAP Smoke Vacuum Diagnostic Detector 12V Auto Emissions Leak Tester
$ 76.55
- Description
- Size Guide
Description
Store categorySign Up Now !
You may also like
Automotive EVAP Smoke Vacuum Diagnostic Detector 12V Auto Emissions Leak Tester
Product Description
Description:
Warranty:All MR CARTOOL Smoke Leak Detector Support Two-year warranty.
MR CARTOOL automotive smoke leak detector is a specialty tool used with vehicle diagnostic devices to check the tightness of the vehicle pipeline system and find leaks, helping the auto repair
technician to quickly and accurately determine whether the fault is caused by the pipeline leaks.
Function and Features:
The Main Function
Tightness Test
: It can test the tightness and leakage of the tested pipeline under system pressure.
Intake System Test
: it can test the air tightness and damage degree of the pipes in the intake system.
Exhaust System Test
: it can test the air tightness and damage degree of the pipes in the exhaust system.
EVAP System Test
: it can test the leakage of fuel evaporation in the EVAP system.
Main Features
1. More directly, accurate and faster than traditional leak detection methods such as soap bubbles and throttle cleaners.
2. Adopting smoke generator technology facilitate smoke stability and large amount output.
3. Built-in air pump, ready for testing and maintenance.
4. Compact, lightweight design allows for any placement of machine for work.
5. Test oil is non-toxic and non-corrosive
Function Introduction:
Intake System Testing
1) Open the air filter cover and take it out.
2) Take out the tapered adapter from the accessory box and insert it into the air inlet pipe
3) Take out the smoke duct from the accessory box and connect it to the smoke outlet.
4) Take out the power cable from the accessory box and connect it to the power supply.
5) Unscrew the filling cap, pour 10ml of test oil, and tighten the filling cap.
6) Connect the car battery, and the then built-in air pump starts to work. Plug the
smoke duct nozzle with your hand to check whether there is smoke
flow;(T105/T110/T130 need to be controlled separately by air switch and smoke switch, while observing the change of pressure gauge).
7) Turn on the smoke switch, (T110/T130 can adjust the smoke flow), wait for 1~3 seconds, when the smoke is output, connect with the taper adapter at once; (T105/T110/T130 can also be connected with the universal airbag for testing).
8) Wait 3 minutes to find out if smoke is leaking from the intake system leaks.
Exhaust System Testing
1) Take the tapered adapter from the accessory box and insert it into the end of the exhaust pipe. In the case of dual exhaust pipes, a rubber plug can be used to block the other end.
2) The exhaust system testing is the same as the intake system testing and can be performed in the same way.
EVAP System Testing
1) Locate the carbon canister on the car and disconnect the fuel inlet/outlet pipe.
2) Take out the EVAP adapter from the accessory box and connect it to the tested oil pipe.
3) The EVAP system testing is the same as the intake system testing and can be performed in the same way.
Engine Tightness Testing
1) Take out the special oil cap adapter from the accessory box and connect it to the oil port (only T130 has this special connector).
2) The Engine tightness testing is the same as the intake system testing and can be performed in the same way.
Maintenance
1) After the testing is completed, clean the disassembled parts and put them back in the packing box.
2) Drain the left over test oil to the recycle bottle.
3) Wipe the equipment clean and check for malfunctions, loose joints, and damages.
4) After cleaning the main unit and accessories, put it in a cool, dry and dust-free place.
5) Smoke and oil will oxidize and deteriorate under long-term high temperature. It will shorten the service life of the smoke generator part, so please change the test oil regularly.
T100 Packing List :
1pc* MRCARTOOL T100 automotive smoke leak detector main unit
1pc* Power cord clamp
1pc* Smoke hose
1set*Hard rubber hose plug
1pc* Test oil bottle
1pc* EVAP special connector &Valve core wrench
1pc* Rubber connector part
1pc* Standard cone adapter
1pc* Hook
1pc* User manual
T105 Packing list:
1pc* MRCARTOOL T105 automotive smoke leak detector main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Valve core wrench
1pc* EVAP special connector & rubber connector part
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
T110 Packing list:
1pc* MRCARTOOL T110 automotive smoke leak detector main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Soft rubber hose plug
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Hook
1pc*Rubber connector part
1pc* EVAP specilal connector & Valve core wrench
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
T130 Packing list:
1pc* MRCARTOOL automotive smoke leak detector T130 main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Soft rubber hose plug
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Valve corde wrench
1pc* EVAP specilal connector & rubber connector part
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
MR CARTOOL SMOKE LEAK DETECTOR:
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We only accept PayPal payments.
Payment should be made within 5 days after bidding ends.
We are not responsible for buyers' local taxes.
(1) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
(2)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
Delivery details
We only ship parcel to the address in eBay payment.
(1)0Please make sure payment address in eBay is correct.
(2)Please be known that different shipping service means different shipping charge and shipping time!!!
(3)All packages will be added with a tracking number.
Terms of sales
(1)Item may be returned for refund or replacement within 30 days of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.
(2)Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
(3)Before any return, a Return Merchandise Authorization (RMA
)
must be obtained
by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.
About us
(1)We are a professional worldwide wholesale company, with own factory located in China. We supply many products on Automobile consumer . Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
(2)
We are a professional Authorized dealers of AUTOOL,Launch,Autel and Xtool .
(3)Global logistics system:US warehouse, German warehouse, China warehouse.
Contact us
(1)Our normal business hour is
Monday to Friday 9:00 AM to 6:00 PM Beijing TIME.
(2)Please email me through "
MY MESSAGES
" on eBay, if you have any questions about our listings or inventory or troubles.
(3)Welcome your any-time parchase!