Automotive EVAP Smoke Machine Detector Car Fuel Pipe System Vacuum Leak Tester

Description

Automotive EVAP Smoke Machine Detector Car Fuel Pipe System Vacuum Leak Tester
Product Description
How SM601 Smoke Leak Detector Was Born?
Have you met some troubles like below when using an smoke machine automotive?
- "Smoke turns to liquid almost instantly inside whatever you are testing"
- "The smoke is very thin, impossible to see and find leaks"
- "Fluid leak cause catastrophic engine damage"
After five generations of technological innovation, SM601 Smoke Leak Detector was born. Avoiding all the disadvantage of past technologies, SM601 has these advantages:
Easy to Use:
With easy-use function and portable design, the hook allows you to hang it on your hood latch, and conical adapter will fit most intakes.
Powerful and Durable:
The third-generation technology uses heating wire and wick cotton, needs to be replaced frequently and the smoke has a peculiar smell. The fourth-generation technology uses ceramics heating, it's very fragile during transportation and use. SM601 auto smoke machine avoids these shortcomings, as a durable smoke detector, it also saves you a lot of money.
Output Smoke in Seconds:
Output lots of smoke within 30s to detect the leaks in pipe system, reducing diagnostic time dramatically.
Safe for All Vehicles:
Protect vehicles from high pressure damage, also avoid fluid leak cause engine damage.
How To do leakage Test with SM601 Automotive Smoke Machine?
Step1
Mount the hook and shop air adapter to the SM601 smoke leak detector, plug the power cord into the socket.
Step 2
Fill (mineral Oil based) smoke oil into the SM601 auto smoke machine, from refill port on the top.
Note:
The oil level shall not exceed the level gauge.
Step 3
Connect shop air supply, connect 12V vehicle power, introduce shop air to the SM601 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then SM601 smoke machine automotive will start to generate smoke.
Step 4
In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
Professional Full System Leak Detector, Won't Miss Any Leaks.
Romondes SM601 Car Smoke Leak Detector is a universal and professional auto pipe leak detect tool, it will help you to locate hard-to-find leaks in any sealed system, such as Cooling System Test, Car Sealing Test, Throttle Shafs, Engine Block Test, Intake System Test, Exhaust Systems Test, Crankcase system test, Fuel Tank System Test, Turbo System Test, Various Pipe Fittings Test, etc.
Car Sealing Test:
Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof ,etc.
Fuel Tank System Test:
When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, i
t can cause leaks in the fuel tank system.
Exhaust System Test:
Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
Intake System Test:
Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
EVAP System Test:
Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
Crankcase System Test:
Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
Turbo Test:
The leakage of coolant would cause the engine to report high water temperature.
Various Pipe Fittings Test:
Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
With the superb design, the SM601 leak detector can out put smoke within seconds and discover leakage holes as small as 0.2mm. Adopts the principle of isolated heat conduction, the smoke created from the machine is non-toxic. To ensure the safety of people and vehicles, the engine does not need to be ignited during use. Unlike the traditional method of using soapy water, only the upper half of the complex pipeline can be tested, cars are tested for all-round pipeline leakage.
Output pressure: 0.5PSI
Output Volume:< 8LP M
Power Supply: DC12V
Current: 5AMP
The flow meter indicates the leak size:
For DTC P0456, the meter should be at0.1 LPM.
For DTC P0442, the meter should be at0.5 LPM.
Overheat & Anti-frost Protection
SM601 EVAP Smoke Machine is equipped with a smart protector. When the temperature of the device exceeds eg. 75°C , the power will be intelligently activated to turn it off to ensure the safety of the operator and the device, also suitable for low temperature operation.
Note: Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.And don't use SM601 more than 20 minutes.Excessive heat will cause the tube to melt.
What's in the Package?
Packing List:
1*Main Unit
1*Smoke Delivery Hose
1*Power Cord
1*Hook
1*Intake Adapter
1*Shop Air Trunk (USA)
1*EVAP Service Port Adapter
1*EVAP Removal Tool
"0" Risk Purchase
To ensure your high-quality shopping experience, Romondes provide12-month w-arranty. If you have any questions, feel free to contact Romondes team via Ebay message.
Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with automotive diagnostic tool, you can find the vehicle problem accurately and diagnose fault.
*Note: Like most EVAP smoke machines in the market, SM601 smoke leak detector need to connect air supply, if you want an car smoke machine with its own air supply, we would recommend ANCEL S2000 which has its own air compressor.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept paypal only.
Please Note：
Import duties,taxes and charges are not included in the item price or shipping charges.
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We are not responsible for custom duties and related taxes. Orders will be shipped as a gift or as a sample.
In general, no custom duties and tax will be charged.
Delivery details
Please make sure it's correct and include phone number via PayPal when you make payment. This will help your product to be received safely and quickly! UPS，USPS or
express delivery
takes about 3-8 business Days. Economy services takes 20-30 days.
Terms of sales
Return Policy
If you are not satisfied with the purchased item, please return it within 30 days after receiving the package, and the shipping fee will be borne by us. All returns should be kept intact, please email us first to get the return address and instructions. Thank you for your cooperation and understanding, and wish you a happy life!
About us
We have been engaged in the computer-related equipment industry for many years, and the company is based on honesty. Satisfaction with you is our only mission.
We have three warehouses in Hong Kong, Shenzhen and the United States. We assure you, not only good service, but also high-quality products.
Contact us
If you are not satisfied with your purchase, please send a message to us before giving negative feedback or opening case.
We will try our best to help you.
Much appreciated if you could leave us positive feedback and 5-star.
Customer Service Hours: M-F: 9:00AM - 18:30PM BST (Beijing Standard Time)