ANCEL S300 Smoke Machine Automotive EVAP Leak Detector Tester Car Boat ATV Truck

Description

ANCEL S300 Car Evap Smoke Machine Oil Pipe Leaks Analyzer Tester Fuel Pipe Leakage Generator Auto EVAP System Diagnostic Tools
Do You Bothered By The Following Problems?
More fuel consuming?
Faster idling speed?
Water Leaks?
Hard to find the leaks?
ANCEL S300 smoke leak detector supports multi-system testing, especially EVAP system
EVAP System Test
Intake System Test
Exhaust Systems Test
Crankcase system test
Car Sealing Test
Fuel Tank System Test
Turbo System Test
Various Pipe Fittings Test
Wide Range of Applications
Free to choose Air/Smoke method to find leaks
Upgraded S300 Automotive Smoke Machine
Fits All Lines and Hoses
How to work with ancel s300 smoke leak detector?
Step1: Fill in 10ml-20ml test oil (baby oil) to the detector
Step2: Disconnect the pipe that needs to be connect with the detector
Step3: Connect detector with DC12V battery,device starts to work
Step4: The pipe will be filled with smoke,check the leak points
2 kinds of modes: AIR model+Smoke mode
Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil
SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.
How to judge leakage- through the pressure gauge?
NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system.
Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system.
Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.
Adjustable Smoke Output Help To Pinpoint Leaks Quick
Adopt The Latest 5th Generation Technology
Overheat & Anti-frost Protection
Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.
Anti-frost Protection
The device can also work normally at -20℃.
Easy To Detect an Air Leak Vehicle Cabin
Specification
Power source:12V Fully Charged vehicle battery
Current:6A
Flow rate: <6 L/min
Pressure output:0.8-1.0 bar (0.8-14.5psi)
Diagnose All Types Of Leaks With Adapters