120A 14V Automotive ECU Programming Dedicated Power Supply for AUDI VW BMW BENZ

Description

Store category
Sign Up Now !
You may also like
120A 14V Automotive ECU Programming Dedicated Power Supply for AUDI VW BMW BENZ
Product Description
Note : please don’t start the engine during the process of power charging to the vehicle to avoid
damage to the device caused by adverse charging.
This charger is only suitable for 12V lead-acid battery charging.
Description:
Automotive Programming Dedicated Power Output Characteristics:
DC voltage: 14.2V
Rated current: 120A
Rated power: 1700W
Ripple and noise: 100mVp-p
Automotive Programming Dedicated Power Input Characteristics:
Rated input voltage: 220V (+/-20%)
Frequency range: 40-60HZ
Power factor: 0.95
Efficiency: 85%
Automotive Programming Dedicated Power Protection Features:
Overload: 90-110% of rated output power
Over-voltage: 15V
Operating temperature: -40 - +70 C
Safety: UL60950, TUV EN60950-1
Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC
Insulation resistance: I/P-O/P, I/P-FG:100M Ohms, 500VDC/25 /70%RH
EMC: EN55022, EN61000
2, When the battery is charging over or when the charger output current is lower than 3A or,it will display BATT FULL/DISAB..When the current is restored to 3.5A,the BATT FULL/DISAB prompt disappears.
3, When the charging current is over 100A or the output voltage of the device is higher than 15V,the device will automatically disconnect the DC output and at the same time illuminate the ALARM while the WARN indicator flashes,accompanied by drops of alarm sound.The display shows"Temper High"or"Current High". When the current or voltage back to the normal range,click the FORCF START button,will stop drip alarm.
4, When the internal temperature of the device is higher than 76℃,then “WARN” will start and sounds an alarm. When the temperature is over 80 ℃, the "Temper High" will be displayed, and the output will be disconnected.
5, When the input of the equipment is over current or over voltage,it will burn out the inner tube. Please check the input current & voltage and then use.
6.When the charger is turned on, the fan 1 is located at the back end of the machine,and the fan 2 can start at the same time.Ensure that the charger does not stop working and damage due to overheating.
Note:
1. Please use 10A or above of the power supply socket connected to the equipment. Please abide by the general rules of the safe use of electricity. A power supply socket with a ground wire must be used.
2. Verify that the connection between the positive and negative poles is correct when connecting the clip cable to the battery or vehicle.
3. After charging the wire into the connector, please tighten the right and ensure that the connection is reliable and then turn on the power switch.
4. The machine has high pressure, non professionals do not operate, so as not to shock.
5. This charger is only suitable for 12V lead-acid battery charging.
Package Include:
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept paypal only. Please make sure payment is made within 4 days of the end of auction, or UPI Strike will be filled with eBay. We will ship out your item very soon after we receive your payment.
Delivery details
For US buyers
, Usually we use E-packet, sometimes DHL/EMS and other Excellent Service is used per customers' request.
For those who are outside US
, HK POST/SG POST/ DHL /EMS ect. will be used. It all depends on our customers' choices
.
But pls be known that Different shipping service means different shipping charges and shipping time!
! But
All packages are added with tracking number.
The item will be shipped directly from the
factory
We try our best to give customers' good buying experience. Hope we can deal with soon and let us witness this moment.
Terms of sales
Warranty:
1. 6 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
3. For a free copy of the warranty, please message to us.
For international buyers
Import duties, taxes and charges are not included in the item price or shipping charges.There charges are the buyer's responsibility
Pls check with your country's Customs Office to determine what these addition costs will be prior to bidding /buying
About us
Welcome to our store! We are Mrcartool, a professional automotive repair and maintain enterprise. Our own factory and chain repair shop located in China. We supply many products on Automobile consumer electronics, such as coder reader, diagnostic tool, GPS, DVR, bluetooth Car kit, injector cleaner and battery system tester etc. High product quality, reasonable prices, excellent customer service and a reliable credit standing is our target.
Contact us
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. pls contact us immediately
Before
you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them! Thank you!
Feedback